Upcoming Events

All users have lab access during staffed hours (Mo-Th 8am - 9pm; Fr 8am-7pm).  To be able to use the lab after-hours and on weekends, users need to understand how to respond in emergency situations. During the 24h access qualification, a small group of PTC members ask you relevant safety questions that allow you to demonstrate your knowledge. This discussion typically takes 10-15 minutes.

Prior completion of the wet chemical training is required, as it provides the relevant safety foundations. 

This group training event will focus on the basic theory and operation of the Quantum Design Inc. Magnetic Property Measurement System (MPMS-3). Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. 

Please review the MPMS Introduction video prior to the training

After this session you can schedule time to run your sample(s).
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The orientation consists of a series of self-paced videos to watch, and a 30-minute check-in over zoom, where we provide an introduction, answer questions about the lab & capabilities and how to get started, and check for any missing trainings. All cleanroom and packaging space users need to complete the orientation before card access can be granted.

Users with no prior cleanroom experience also take a half-day “quick-start” class, which provides a hands-on experience in core methods (deposition, lithography, etch). Users with prior cleanroom experience will receive a waiver during the orientation check-in. If you only need to use the packaging space (and not the cleanroom), the quick-start is not needed.

Registering for the orientation, you will get a chance to describe your general fabrication needs, helping us better understand each user’s goals and expectations. The registration form also contains a checklist to help you spot any missing EHS trainings.

After registering, you will get an email with a link to the videos to watch, and the zoom link to the orientation event.

This class will teach the basics of collecting data using the Rigaku SmartLab with divergent beam and parallel-beam optics.  The focus will be data collection from polycrystalline thin films using X-Ray Powder Diffraction (XRPD) techniques and Grazing Incidence X-Ray Diffraction (GIXD).  The techniques will be applicable to other types of samples, such as powders and pellets. In addition, the basics of collecting X-ray reflectivity (XRR) data will be covered.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This training event will focus on the basic imaging and operation of the Cypher S and VRS AFM's available at MIT.nano Characterization Facilities. Starting from the basic principles of AFM, users will also learn about cantilever selection and installation, different imaging modes, image quality improvement, and data processing and analysis methods. Users can bring their own samples for this training and SPM probes are provided. Notice, users must supply their own probes for followup qualification sessions. Full independent tool access will be granted upon completion of 2 additional one-on-one supervised use sessions that will be coordinated with the staff member during this small group training. 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

Characterization.nano orientation provides an introduction to MIT.nano advanced measurement and characterization capabilities with emphasis on the state-of-the-art equipment located outside the MIT.nano cleanroom facilities and in build 13.

Completion is recommended to those interested in accessing Characterization.nano instrumentation located in the non-cleanroom spaces only. Those seeking to access metrology instrumentation located both inside and outside the cleanroom facilities, have to complete MIT.nano fab and metrology combined orientation. The MIT.nano characterization orientation components include:

1. Broad overview of the different facilities and capabilities at MIT.nano. Emphasis will be made on advanced imaging and analysis capabilities;
2. Background on how work is conducted on MIT.nano's shared equipment;
3. Brief overview of characterization work safety rules;
4. Virtual Tour through the different characterization lab spaces. Participants are encouraged to ask questions to relate MIT.nano capabilities to their research interests and needs.

After registering, you will get an email with zoom link to the orientation event.

This group training event will focus on the basic theory and operation of the Fourier Transform Infrared Spectrometer 
Users will learn about specifics of the instrument configurations, available accessories and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training in whatever form is convenient. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.