Past Events

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

This training event will focus on the basic imaging and operation of the Cypher S and VRS AFM's available at MIT.nano Characterization Facilities. Starting from the basic principles of AFM, users will also learn about cantilever selection and installation, different imaging modes, image quality improvement, and data processing and analysis methods. Users can bring their own samples for this training and SPM probes are provided. Notice, users must supply their own probes for followup qualification sessions. Full independent tool access will be granted upon completion of 2 additional one-on-one supervised use sessions that will be coordinated with the staff member during this small group training. 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The orientation consists of a series of self-paced videos to watch, and a 30-minute check-in over zoom, where we provide an introduction, answer questions about the lab & capabilities and how to get started, and check for any missing trainings. All cleanroom and packaging space users need to complete the orientation before card access can be granted.

Users with no prior cleanroom experience also take a half-day “quick-start” class, which provides a hands-on experience in core methods (deposition, lithography, etch). Users with prior cleanroom experience will receive a waiver during the orientation check-in. If you only need to use the packaging space (and not the cleanroom), the quick-start is not needed.

Registering for the orientation, you will get a chance to describe your general fabrication needs, helping us better understand each user’s goals and expectations. The registration form also contains a checklist to help you spot any missing EHS trainings.

After registering, you will get an email with a link to the videos to watch, and the zoom link to the orientation event.

This course will teach you how to profile fit data in the program HighScore Plus.  Profile fitting is the first step to quantification of XRPD data.  Profile fitting allows a user to extract precise information about peak position, intensity, and width. Once XRPD data have been profile fit, a variety of calculations are possible. This session will focus on refining unit cell lattice parameters, indexing diffraction data, % crystallinity, and calculating the relative weight fractions of phases in a mixture (quantitative phase analysis). 

Additional workshops will focus on calculating nanocrystallite size and microstrain from peak broadening. 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Quantum Design Inc. Magnetic Property Measurement System (MPMS-3). Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. 

Please review the MPMS Introduction video prior to the training

After this session you can schedule time to run your sample(s).
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

All users have lab access during staffed hours (Mo-Th 8am - 9pm; Fr 8am-7pm).  To be able to use the lab after-hours and on weekends, users need to understand how to respond in emergency situations. During the 24h access qualification, a small group of PTC members ask you relevant safety questions that allow you to demonstrate your knowledge. This discussion typically takes 10-15 minutes.

Prior completion of the wet chemical training is required, as it provides the relevant safety foundations. 

This group training event will focus on the basic operation of the EDAX EDS available at Characterization.nano. This group training will cover theoretical background, software interface and strategies for Data collection. Users can bring their own samples for this training. SEM training is a prerequisite for this training. Full independent tool access will be granted upon completion of this training session.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.  

Basic SEM training is a prerequisite for this training.

This workshop will introduce you to the X-ray powder diffraction data analysis software "HighScore Plus".  This course will focus on phase analysis (phase ID) using HighScore Plus. Students will be practice using the interface to accomplish basic tasks such as visualizing data, fitting background, peak search; and phase analysis by comparing experimental data to reference patterns and automated search/match.

This course is a pre-requisite for all advanced analysis workshops using HighScore Plus.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Renishaw Invia Reflex Micro Raman
Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This class will teach students the basic operation of the Bruker D8 HRXRD instrument.  The emphasis of this class will be on using triple-axis diffraction to collect data from epitaxial thin films.  This session will cover collecting coupled-scans of Bragg peaks and rocking curves.  This class will establish the foundation for collecting reciprocal space maps of epitaxial thin films, but the actual collection of RSMs will be covered in the separate class.  

This class will also cover the basis of collecting X-ray reflectivity (XRR) data from thin films.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.