Past Events

This course will teach users the basics of data collection using the SAXSLAB instrument.  The SAXSLAB system has automated detector positioning for SAXS/WAXS analyses of samples in capillaries or freestanding films in a transmission geometry and GISAXS/GIWAXS of samples supported on a monolithic substrate in grazing incidence reflection gemoetry. Calibration of the q-range using silver behenate, acquisition of empty, buffer (if sample is immersed in solvent) and dark current exposures for similar timescales and data reduction procedures will be covered. The SAXSLAB instrument is very well suited for analyzing polymers, soft materials, nanoparticles in solution or dried on substrates, porous samples, and nanostructured surfaces. The emphasis in this training session will be design of experiment, routine collection and data reduction.

SAXS - small angle X-ray scattering
WAXS - wide angle X-ray scattering
GISAXS - grazing incidence small angle X-ray scattering

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Perkin Elmer 1050 UVVISNIR Spectrophotometer
Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This lecture is intended for people who want to become independent self-user of the small or wide angle X-ray scattering (SAXS) instrument in the MRL X-Ray Lab.  SAXS describes the analysis of any sample that has nanostructured (1-100nm) electron density fluctuations -- i.e., nanoparticles in solution, block co-polymers, ionic liquids, soft matter, etc. Typically nanoscale electron density variations arise as structured (nanoscale object in a lattice), unstructured (in solution), or oriented (fiber or affixed to substrate) therefore treatment of each type of sample is on a case by case basis.  

Students must also attend SAXSLAB instrument specific training course to learn how to put the knowledge obtained in the lecture to practice.

This lecture will survey the fundamentals of small angle X-ray scattering (SAXS), focusing on the bare essentials required to productively collect and analyze SAXS data.  In addition to theory, this lecture will cover practical considerations such as common sources of error and a guide to structural interpretation and justification using SAXS patterns.

This group training event will focus on the basic theory and operation of the Bruker Dektak DXT-A Stylus Profilometer 
Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This training event will focus on the basic imaging and operation of the Bruker Icon AFM available at MIT.nano Characterization Facilities. Starting from the basic principles of AFM, users will also learn about cantilever selection and installation, different imaging modes, image quality improvement, and data processing and analysis methods. Users can bring their own samples for this training and SPM probes are provided. Notice, users must supply their own probes for followup qualification sessions. Full independent tool access will be granted upon completion of 2 additional one-on-one supervised use sessions that will be coordinated with the staff member during this small group training.

The Icon XR has many SPM modes including contact and PeakForce tapping mode with ScanAsyst, Magnetic Force Microscopy, Piezo Force Microscopy, conducting atomic force microscopy (AFM). There are also additional features such as electrical characterization from 80 fA to 1 uA with 10 nm spatial resolution, Kelvin Force Probe Microscopy with amplitude or frequency feedback, and pixel-by-pixel quantitative force characterization to probe material properties. Following the basic training session, users can coordinate an advanced mode specific training with the MIT.nano staff.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.

This instrument training will teach users how to use the Multiwire Back-Reflection Laue Diffractometer to determine the orientation of single crystals and to determine if single crystals are possibly twinned.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic imaging and operation of the Zeiss SIGMA HD VP available at Characterization.nano. Users will learn about specifics of the instrument configurations, different imaging detectors available and strategies for image quality improvement. We'll use standard sample for this training. Full independent tool access will be granted upon completion of 2 additional one-on-one supervised use sessions that will be coordinated with the staff me. 

Active MIT.nano user account  (MUMMS) is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Fourier Transform Infrared Spectrometer 
Users will learn about specifics of the instrument configurations, available accessories and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training in whatever form is convenient. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This training event will focus on the basic imaging and operation of the Themis Z available at MIT.nano Characterization Facilities. Users will learn about specifics of the tool configuration, different imaging detectors available and strategies for image quality improvement. Standard sample will be used during this training. Full independent tool access will be granted upon completion of additional one-on-one supervised use sessions, project specific as needed. Additional session will be coordinated with the staff member during this small group training. 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

Alternative times available upon request