Past Events

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

The orientation consists of a series of self-paced videos to watch, and a 30-minute check-in over zoom, where we provide an introduction, answer questions about the lab & capabilities and how to get started, and check for any missing trainings. All cleanroom and packaging space users need to complete the orientation before card access can be granted.

Users with no prior cleanroom experience also take a half-day “quick-start” class, which provides a hands-on experience in core methods (deposition, lithography, etch). Users with prior cleanroom experience will receive a waiver during the orientation check-in. If you only need to use the packaging space (and not the cleanroom), the quick-start is not needed.

Registering for the orientation, you will get a chance to describe your general fabrication needs, helping us better understand each user’s goals and expectations. The registration form also contains a checklist to help you spot any missing EHS trainings.

After registering, you will get an email with a link to the videos to watch, and the zoom link to the orientation event.

This class will teach the basics of collecting data using the Rigaku SmartLab with divergent beam and parallel-beam optics.  The focus will be data collection from polycrystalline thin films using X-Ray Powder Diffraction (XRPD) techniques and Grazing Incidence X-Ray Diffraction (GIXD).  The techniques will be applicable to other types of samples, such as powders and pellets. In addition, the basics of collecting X-ray reflectivity (XRR) data will be covered.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

All users have lab access during staffed hours (Mo-Th 8am - 9pm; Fr 8am-7pm).  To be able to use the lab after-hours and on weekends, users need to understand how to respond in emergency situations. During the 24h access qualification, a small group of students and staff asks you relevant safety questions that allow you to demonstrate your knowledge. This discussion typically takes 10 minutes.

Prior completion of the wet chemical training (listed as events on this site) is required, as it provides the relevant safety foundations.

After registering, you will get an email with the zoom link for the session.

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

The orientation consists of a series of self-paced videos to watch, and a 30-minute check-in over zoom, where we provide an introduction, answer questions about the lab & capabilities and how to get started, and check for any missing trainings. All cleanroom and packaging space users need to complete the orientation before card access can be granted.

Users with no prior cleanroom experience also take a half-day “quick-start” class, which provides a hands-on experience in core methods (deposition, lithography, etch). Users with prior cleanroom experience will receive a waiver during the orientation check-in. If you only need to use the packaging space (and not the cleanroom), the quick-start is not needed.

Registering for the orientation, you will get a chance to describe your general fabrication needs, helping us better understand each user’s goals and expectations. The registration form also contains a checklist to help you spot any missing EHS trainings.

After registering, you will get an email with a link to the videos to watch, and the zoom link to the orientation event.

All users have lab access during staffed hours (Mo-Th 8am - 9pm; Fr 8am-7pm).  To be able to use the lab after-hours and on weekends, users need to understand how to respond in emergency situations. During the 24h access qualification, a small group of students and staff asks you relevant safety questions that allow you to demonstrate your knowledge. This discussion typically takes 10 minutes.

Prior completion of the wet chemical training (listed as events on this site) is required, as it provides the relevant safety foundations.

After registering, you will get an email with the zoom link for the session.

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.