Past Events

Characterization.nano and Bruker will host a two-day workshop featuring tool talks and hands-on sessions Tuesday, September 9 and Wednesday, September 10. The afternoon hands-on sessions are limited to 5 individuals per session, due to space restrictions. Please use this page to register for a hands-on session.

Registration for the morning talks, as well as the talk abstracts and schedule, can be found here: https://mitnano.mit.edu/events/tool-talks/bruker

The Wet Chemical Process Training is a web-based course that is designed to provide FAB.nano researchers with an introduction to the chemical hazards in the lab, as well as proper procedures and behaviors for safe handling and disposal of wet chemicals.

The class is a prerequisite for the use of any fume hood or wet bench in the laboratory, including hands-on training for spin coaters, corrosive hoods and wet benches, and for 24-hour access to the Fab.nano facility.

Prior to completing the training, please read and understand MIT.nano's Work Together Policy.

You can find the Wet Chem training on Atlas.

When finished, please email mitnano-safety@mit.edu that you have finished and the staff will verify your course status on Atlas and approve of your training through NEMO.

If you have supplemental questions, having trouble passing the quiz, or have any other concerns related to the Wet Chem Training, we will be holding Office Hours during this time slot. Please register below.

Characterization.nano and Bruker will host a two-day workshop featuring tool talks and hands-on sessions Tuesday, September 9 and Wednesday, September 10. The afternoon hands-on sessions are limited to 5 individuals per session, due to space restrictions. Please use this page to register for a hands-on session.

Registration for the morning talks, as well as the talk abstracts and schedule, can be found here: https://mitnano.mit.edu/events/tool-talks/bruker

All users have lab access during staffed hours (Mo-Th 8am - 9pm; Fr 8am-7pm).  To be able to use the lab after-hours and on weekends, users need to understand how to respond in emergency situations. During the 24h access qualification, a small group of PTC members ask you relevant safety questions that allow you to demonstrate your knowledge. This discussion typically takes 10-15 minutes.

Prior completion of the wet chemical training is required, as it provides the relevant safety foundations. 

Characterization.nano orientation provides an introduction to MIT.nano advanced measurement and characterization capabilities with emphasis on the state-of-the-art equipment located outside the MIT.nano cleanroom facilities and in build 13.

Completion is recommended to those interested in accessing Characterization.nano instrumentation located in the non-cleanroom spaces only. Those seeking to access metrology instrumentation located both inside and outside the cleanroom facilities, have to complete MIT.nano fab and metrology combined orientation. The MIT.nano characterization orientation components include:

1. Broad overview of the different facilities and capabilities at MIT.nano. Emphasis will be made on advanced imaging and analysis capabilities;
2. Background on how work is conducted on MIT.nano's shared equipment;
3. Brief overview of characterization work safety rules;
4. Virtual Tour through the different characterization lab spaces. Participants are encouraged to ask questions to relate MIT.nano capabilities to their research interests and needs.

After registering, you will get an email with zoom link to the orientation event.

The orientation consists of a series of self-paced videos to watch, and a 30-minute check-in over zoom, where we provide an introduction, answer questions about the lab & capabilities and how to get started, and check for any missing trainings. All cleanroom and packaging space users need to complete the orientation before card access can be granted.

Users with no prior cleanroom experience also take a half-day “quick-start” class, which provides a hands-on experience in core methods (deposition, lithography, etch). Users with prior cleanroom experience will receive a waiver during the orientation check-in. If you only need to use the packaging space (and not the cleanroom), the quick-start is not needed.

Registering for the orientation, you will get a chance to describe your general fabrication needs, helping us better understand each user’s goals and expectations. The registration form also contains a checklist to help you spot any missing EHS trainings.

After registering, you will get an email with a link to the videos to watch, and the zoom link to the orientation event.

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

The Wet Chemical Process Training is a web-based course that is designed to provide FAB.nano researchers with an introduction to the chemical hazards in the lab, as well as proper procedures and behaviors for safe handling and disposal of wet chemicals.

The class is a prerequisite for the use of any fume hood or wet bench in the laboratory, including hands-on training for spin coaters, corrosive hoods and wet benches, and for 24-hour access to the Fab.nano facility.

Prior to completing the training, please read and understand MIT.nano's Work Together Policy.

You can find the Wet Chem training on Atlas.

When finished, please email mitnano-safety@mit.edu that you have finished and the staff will verify your course status on Atlas and approve of your training through NEMO.

If you have supplemental questions, having trouble passing the quiz, or have any other concerns related to the Wet Chem Training, we will be holding Office Hours during this time slot. Please register below.

All users without previous cleanroom work experience are required to take the quick-start training. Waivers for prior experience will be handled during the Fab.nano orientation.

The quick-start provides hands-on training to new users, by following through a simple 1-mask process in a small group. You will gain familiarity with entering the lab, handling samples, learn about deposition, lithography and etch tools, and how to verify process results.

An active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.

Because we are working in the lab, please wear long pants and full shoes

Please have the Fab.nano Orientation completed before the quick-start event.

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.

Prior to arriving, please complete the online prerequisite training in the Atlas Learning Center. The in-person portion will include a discussion and questions on the topics covered in the online training.