Past Events

This course is intended to provide users with practical examples of fitting SAXS data with SASview software.

Since most SAXS profiles do not exhibit well defined peaks like crystalline diffraction but instead characteristic "slopes," it is a heavily model-dependent method. After proper data reduction of a SAXS patterns, the data interpretation methods include extracting structural information from standardized plots such as Guinier, Porod, Kratky and Zimm plots. Elements of SAXS data modeling include calculations of the radius of gyration, of the single-particle form factor, inter-particle structure factors and the modeling effects of polydispersity.

This course will teach users the basics of data collection using the SAXSLAB instrument.  The SAXSLAB system has automated detector positioning for SAXS/WAXS analyses of samples in capillaries or freestanding films in a transmission geometry and GISAXS/GIWAXS of samples supported on a monolithic substrate in grazing incidence reflection gemoetry. Calibration of the q-range using silver behenate, acquisition of empty, buffer (if sample is immersed in solvent) and dark current exposures for similar timescales and data reduction procedures will be covered. The SAXSLAB instrument is very well suited for analyzing polymers, soft materials, nanoparticles in solution or dried on substrates, porous samples, and nanostructured surfaces. The emphasis in this training session will be design of experiment, routine collection and data reduction.

SAXS - small angle X-ray scattering
WAXS - wide angle X-ray scattering
GISAXS - grazing incidence small angle X-ray scattering

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Perkin Elmer 1050 UVVISNIR Spectrophotometer
Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This lecture is intended for people who want to become independent self-user of the small or wide angle X-ray scattering (SAXS) instrument in the MRL X-Ray Lab.  SAXS describes the analysis of any sample that has nanostructured (1-100nm) electron density fluctuations -- i.e., nanoparticles in solution, block co-polymers, ionic liquids, soft matter, etc. Typically nanoscale electron density variations arise as structured (nanoscale object in a lattice), unstructured (in solution), or oriented (fiber or affixed to substrate) therefore treatment of each type of sample is on a case by case basis.  

Students must also attend SAXSLAB instrument specific training course to learn how to put the knowledge obtained in the lecture to practice.

This lecture will survey the fundamentals of small angle X-ray scattering (SAXS), focusing on the bare essentials required to productively collect and analyze SAXS data.  In addition to theory, this lecture will cover practical considerations such as common sources of error and a guide to structural interpretation and justification using SAXS patterns.

This group training event will focus on the basic theory and operation of the Bruker Dektak DXT-A Stylus Profilometer 
Users will learn about specifics of the instrument capabilities and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The Wet Chemical Process Training provides an introduction for all work with liquid chemicals in Fab.nano. Completion is required for any use of fume hoods or wet benches (including solvents, hands-on training for spin coaters, corrosive hoods and wet benches).

The training is also a prerequisite for 24-hour access to the Fab.nano facility, as it provides the relevant safety foundations.

This instrument training will teach users how to use the Multiwire Back-Reflection Laue Diffractometer to determine the orientation of single crystals and to determine if single crystals are possibly twinned.

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

The PANalytical X'Pert Pro diffractometer is an excellent choice for X-ray powder diffraction (XRPD). The default mode of this instrument is in Bragg-Brentano parafocusing geometry, which is used for polycrystalline materials. We usually keep a linear position sensitive detector on the instrument, which permits rapid data collection for angles higher than 4 degrees 2Theta.

The basic instrument training session will focus on the collection of powder diffraction data using the high-speed optics, which consist of programmable divergence slits and X'Celerator high-speed detector, and the Open Eularian Cradle (OEC) sample stage. This configuration is best suited for high-speed high-resolution data collection from powders and polycrystalline thin films.

Accessories include several different sample stages and optics. After you have completed this training, you can request individaul training on the other configurations available with this instrument. There are three other sample stages that are available: (1) the 15 position automatic sample changer, (2) the furnace that can heat samples up to 1200 C, and (3) the cyrostat that can cool samples down to 11 K. The PANalytical also can be configured parallel-beam optics for grazing incidence X-ray diffraction (GIXD). After you have completed the basic training, you can request individual training on using the other configurations.

Users of this instrument should also strongly consider taking a data analysis course to suit their needs, such as the line profile fitting course for crystallite size and microstrain analysis, the Rietveld refinement series for quantitative phase analysis and unit cell analysis, or the Introduction to High Score Plus for qualitative phase identification and database search techniques.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic imaging and operation of the Zeiss SIGMA HD VP available at Characterization.nano. Users will learn about specifics of the instrument configurations, different imaging detectors available and strategies for image quality improvement. We'll use standard sample for this training. Full independent tool access will be granted upon completion of 2 additional one-on-one supervised use sessions that will be coordinated with the staff me. 

Active MIT.nano user account  (MUMMS) is required to participate in this training. Please setup an account prior to registering for the training event. 

This group training event will focus on the basic theory and operation of the Fourier Transform Infrared Spectrometer 
Users will learn about specifics of the instrument configurations, available accessories and strategies for data collection and data quality improvement. Users can bring their own (non-hazardous) samples for this training in whatever form is convenient. We will work together until we are both comfortable with your safe and successful operation of the instrument in a shared facility environment. This is usually one session <2hours. Full independent tool access will be granted upon completion of this training session.
 

Active MIT.nano user account is required to participate in this training. Please setup an account prior to registering for the training event.